Southlake, Texas Parking Lot Striping
Southlake is a city in northeast Tarrant and southeast Denton Counties in the state of Texas. Southlake is a suburb of Fort Worth and Dallas and is known for exemplary public schools, Southlake Town Square, and Carroll High School's 7-time State Champion football team.
Southlake remained rural until the completion of the DFW International Airport which opened in the 1970s. Due to the close proximity to the airport, Southlake grew throughout the 1980s, 1990s and 2000s. As of 2010, Southlake's population was around 25,000 people.
There Are Many Fun Things to Do in Southlake
Wheel Stops in Your Parking Lot
Concrete Wheel Stops For Parking Lots
Have you ever thought why whenever you are trying to park backward in the parking lot, you don't bump other cars and don't crush your car? This is thanks to the wheel stops.
Types Of Wheel Stops
For the purpose of avoiding car crashes and improving safety in the parking lots, different types of parking bumpers are used. Regardless of what the wheel stops can be made of, they should be durable to withstand any outdoor conditions and pressure of the vehicle. On the one hand, the most suitable material for wheel stops should be long-lasting. If you are looking for the best options for your parking system, you might find concrete and rubber wheel stops the right types.
Concrete wheel stops suit more for outdoor installation for their durability and resistance to various weather conditions. The disadvantage of using concrete wheel stops consists of their fragility as they can be prone to damage under the pressure of heavy loaded trucks.
Compared to concrete parking stops, rubber parking blocks suit well for both indoor or outdoor installation.
Rubber is more durable than even 4000 psi concrete. It is resistant to ultraviolet, moisture, oils, and extreme heat. Also, rubber is more environment-friendly as it is produced of recycled rubber tires. Installation of both rubber and concrete parking blocks can be completed with minimal tools in a matter of minutes.
It is interesting that commercial parking operators consider the installation of the wheel stops unnecessary for the reason of having concrete curbs. Despite the fact that these elements look quite similar, their functions are totally different. Curbs are not able to fully substitute neither rubber nor concrete wheel stops for their shape, material, and function.
For example, concrete parking stops are constructed of 3000, 3500 or 4000 psi concrete which makes them more durable than curbs. On the other hand, rubber parking blocks are softer than their concrete counterparts, not to mention the curbs. Rubber minimizes damage to the car when it hits the wheel stops.
As the height of curbs is usually greater than 10 cm, using them as wheel stops could be damaging for a vehicle.
Current Temperature in Southlake
Contact Us Today For A FREE QUOTE
We service the Southlake area
Arlington, Texas Parking Lot Striping
Arlington is a city in the Dallas–Fort Worth metropolitan area. According to the 2010 census results, the city had a population of 365,438, making it the third-largest municipality in the Metroplex. Arlington is the 50th largest city in the United States and the seventh-largest city in Texas.
Family Fun Activities To Do While Visiting Arlington
Located approximately 12 miles east of downtown Fort Worth and 20 miles west of downtown Dallas, Arlington is home to many exciting attractions.
Speed Bumps In Your Parking Lot
What are Speed Bumps & Which Traffic Control Device Should You Install In Your Parking Lot?
Speedbumps belong to the category of traffic control devices which are used to slow down the speed of traffic. These are used all over the world, and their primary use is in areas where a low-speed limit needs to be followed. Speed bumps have proven to be very useful in controlling the speed of the cars that drive over them.
The height of a usual speed bump lies between three and four inches. The length of the bumps can vary, however. Usually some space is left between the bump and the edge of the road. There are many other variations when it comes to speed control devices. Some of which are speed humps, speed cushions, and speed tables.
Why You Should Hire a Professional
Speed bumps are made of rubber, plastic, asphalt, metal, or concrete. If they’re made of rubber or plastic, it’s easy to get them installed on existing surfaces for a quick and effective setup. Despite being a simple task, there are some basic instructions that need to be followed before installation. If these steps are not followed, a severe accident can happen.
The surface where the bump will be fitted should be clean, dry, and smooth. If there is any damage, it should be repaired before a speed bump is installed. Speed bumps should lie flat on the surface. Once the position is marked, speed bumps should be drilled and fitted on the ground.
When to Replace Speed Bumps in Your Parking Lot
Since most speed bumps are made of plastic or metal, they are subject to wear over time. However, their ease of installation makes them the best candidate to be replaced quickly and effectively. Once you see that the speed bumps in your parking lot are worn out due to excess traffic crossing over them, you can get it replaced the same day within a few minutes.
In parking lots, it is necessary to install speed bumps so that no vehicle can speed and can cause potential damage to a car or a pedestrian. It is best to seek the services of a professional who can decide which material and size will be best for you to use in your parking lot before you make your decision.
Current Weather in Arlington
Contact Us Today For A FREE QUOTE
We service the Arlington area